Our Stage 3 package is the ultimate in RZR turbo systems. Adding this short charge length intercooler system to what is already well known to be the fastest spooling turbocharger in the world and you have the best throttle response of any RZR turbo system available. While some other turbo kit manufacturers may claim that their turbo has "no-lag" or that turbo lag "isn't present with CVT transmissions" this is false. Step into an Aerocharged RZR and experience the difference. Even our standard turbo kit will blow you away with how fast boost comes in. However we didn't stop there. With our Stage 3 Air/Water Intercooler Upgrade system you cut down the charge tube length to one third that of our standard system meaning you get the fastest throttle response. Full boost and full torque as soon as you put your foot down, period. No other RZR turbo system on the market can do that. Further benefits of this system include a cold charge at all times, regardless of speed. If you're crusing the trails and want to take off quickly, your intercooler is way ahead of you. Since the Bosch Cobra water pump is running constantly it makes sure the engine gets nothing but cold air. Where air/air intercoolers are relying on air movement and can heat up in the hot desert sun, this air/water system stays cool in the hottest conditions.



The system is designed around our compact intercooler unit. For those not familiar with this type of intercooler it is basically the exact opposite of a radiator. Hot air from the turbo flows through the intercooler while water is pumped through the intercooler's core and draws heat away from the air, making a cool and dense charge for the engine. The intercooler's design is optimum for our turbo setup to allow a free-flowing charge of air with minimal resistance or pressure drop for the best response and power output. The intercooler assembly is a modular unit with the silicone couplers, mounting bracket, blow-off valve, and pressure switch pre-installed for easy installation. The pressure switch activates a fan to cool the secondary radiator at any boost pressure over 2psi.



The secondary radiator assembly mounts under the hood in the dry storage bin. This is also a preassembled modular unit with the billet fill cap assembly, mounting brackets, fan, and hood scoop installed and ready to go. The fan is wired to the pressure switch on the intercooler and, like the Bosch Cobra water pump, it's activated by a deticated fused relay for reliable performance. The hood scoop easily works with the factory hood (some cutting required) but can also be removed should you choose to use any of the numerous aftermarket hoods for your RZR provided it has a scoop to allow air to flow to the radiator.

To order your new stage 3 upgrade package call 913.541.0200